Description
| Species | A1 | A2 | B1 | C1 | D1 |
| HF-S III 1 Lamp | 280.0 | 265.0 | 30.0 | 28.0 | 4.2 |
| HF-S III 2 Lamps | 280.0 | 265.0 | 30.0 | 28.0 | 4.2 |
| HF-S III 3/4 Lamps | 280.0 | 265.0 | 39.0 | 28.0 | 4.2 |
| Ballast type | Floriated | Number of balls | W lamp power | Wear ballast W | W system power | Input line A | Nominal voltage V | Frequency Hz | Map of electric |
| HF-P 118 TL-D III 220-240V | TL-D 18W | first | 1 × 16 | 2.5 | 18.5 | 0.09 | 220-240 | 50/60 | first |
| HF-P 218 TL-D III 220-240V | TL-D 18W | 2 | 2 × 16 | 3.5 | 35.5 | 0.19 | 220-240 | 50/60 | 2 |
| HF-P 3/418 TL-D III 220-240V | TL-D 18W | 3 | 3 × 16 | 4.5 | 52.5 | 0.25 | 220-240 | 50/60 | 3 |
| HF-P 3/418 TL-D III 220-240V | TL-D 18W | 4 | 4 × 16 | 5.5 | 69.5 | 0.33 | 220-240 | 50/60 | 4 |
| HF-P 136 TL-D III 220-240V | TL-D 36W | first | 1 × 32 | 3.0 | 35.0 | 0.16 | 220-240 | 50/60 | first |
| HF-P 236 TL-D III 220-240V | TL-D 36W | 2 | 2 × 32 | 6.0 | 70.0 | 0.31 | 220-240 | 50/60 | 2 |
| HF-P 336 TL-D III 220-240V | TL-D 36W | 3 | 3 × 32 | 8.0 | 104.0 | 0.46 | 220-240 | 50/60 | 3 |
| HF-P 158 TL-D III 220-240V | TL-D 58W | first | 1 × 50 | 4.5 | 54.5 | 0.24 | 220-240 | 50/60 | first |
| HF-P 258 TL-D III 220-240V | TL-D 58W | 2 | 2 × 50 | 6.0 | 106.0 | 0.48 | 220-240 | 50/60 | 2 |
 |
 |
|---|
Features and benefits
-
Power saving
Ballast HF-Performer III meets the CELMA A2 standard for high-performance electronic ballasts, saving over 25% more electricity than traditional electromagnetic ballasts. Electronic technology not only reduces the power consumption of the bulb, but the loss of ballast is also very low. In addition, due to the use of electromagnetic components, the heat generated by the ballast is very low, which can save additional energy costs for the cooling system.
-
Easy to install and wire
Electronic ballast technology makes the structure of the lamp very compact without the need for starter and capacitor. The installation of the indicator lights should be very compact. All you need to do is simply attach the wire to the spring-loaded spring-loaded connectors that are integrated on the ballast. This connector is ideally suited for manual and automatic installation of vertical and horizontal wires in ALF production lines.
-
Mechanism of operation superiority
Ballast HF-Performer III operates at high frequencies (> 42kHz), which promotes luminous efficiency and removes flickering caused by the 50Hz grid for traditional ferromagnetic ballasts. The pre-firing mechanism allows the lamp to start immediately without blinking (<1.6s) and to ensure lamp life even when used with motion sensors. The ballast can also be used with redundant DC power systems ranging from 186 – 275VDC (IEC / EN 60598-2-22).
-
Safe and reliable
The HF-Períormer III is designed to last for up to 50,000 hours at the highest permissible environmental temperature (Tcmax). Ballast can withstand 60,000 on / off cycles with 1 bulb. This ballast converges high safety standards such as EN 55015 2006 + A12007 (EMC); ENEC & CE and many other international standards on features and safety. The HF-Períormer III features false-positive or false-positive protection, auto-restart when replacing the bulb or after sudden voltage change. The ballast also incorporates an active power factor correction circuit that ensures the power factor always reaches 0.99, a harmonic distortion factor THD <10%, and ensures constant output even under voltage situations. The source of change is continuity.
