Description
Ballast type | Floriated | Number of balls | W lamp power | Weirder ballast w | Power system w ‘ | Input lineA | Voltage V | Frequency Hz | Map of electric |
EB-C 114 TL5 220-240V 50 / 60HZ | TL5 14W | first | 14 | 3 | 17 | 0.08 | 220-240 | 50/60 | first |
EB-C 121 TL5 220-240V 50 / 60HZ | TL5 21’w | first | 21 | 4 | 24 | 0.11 | 220-240 | 50/60 | first |
EB-C 128 TL5 220-240V 50 / 60Hz | TL5 28W | first | 28 | 5 | 33 | 0.15 | 220-240 | 50/60 | first |
EB-C 214 TL5 220-240V 50 / 60Hz | TL5 14W | 2 | 14 | 5 | 33 | 0.15 | 220-240 | 50/60 | 2 |
EB-C 228 TL5 220-240V 50 / 60HZ | TL5 28W | 2 | 28 | 9 | 63 | 0.30 | 220-240 | 50/60 | 2 |
EB-C 314 TL5 220-240V 50 / 60HZ | TL5 14W | 3 | 14 | 7 | 46 | 0.21 | 220-240 | 50/60 | 3 |
|
|
---|
Features and benefits
-
Power saving
Ballast EB-C achieves CELMA A3 performance standard which saves more than 25% of electricity compared to conventional electromagnetic ballasts. Electronic technology not only reduces the power consumption of the bulb, but the loss of ballast is also very low. In addition, due to the use of electronic components, the heat generated by the ballast is very low, which can save additional energy costs for the cooling system.
-
Easy to install and wired
Electronic ballast has a very compact structure all in one. The installation of the light fixture should be very easy with the wire attached to the spring-loaded spring-loaded connectors integrated on the ballast.
-
Quick flicker
Electronic ballast technology helps to bring about light-emitting effects and eliminate flickering due to the effect of 50Hz on traditional ferromagnetic ballasts. Quick-action mechanism without blinking (<2s).
-
Safe and reliable
The EB-C ballast is designed to last 25,000 hours at 3000 turns on and off with a light bulb. This ballast meets the ccc standard, including the Omega 61347 (KemaKeur) outer sheath safety feature and the EMC EN 55015 2006 + AI 2007 standard. The ballast has a high power factor of 0.95, a harmonic distortion factor THD <25.
-
Technical standards and certifications
RF interference <300 MHz | EN 55015 ed7.1 |
---|---|
Harmonic | EN 61000-3-2 |
Safe | EN 61347-2-3: |
Shock & impact | IEC 60068-2-6 Fc; IEC 60068-2-29 Eb |
Quality standards | ISO 9001 |
Environmental standards | ISO 14001 |
Energy efficiency | CELMA EEI = A3 |
Conformance | TISI, TSB, CB Safety |